Home » Blog » Hard drive disk unlock lockless PCB circuit board

Hard drive disk unlock lockless PCB circuit board

Leave a Comment / Blog / By
With the continuous updating of Western Digital hard disk products, many new hard disk models no longer need to be replaced with a PCB board and the ROM chip can be read out smoothly. For example, the circuit board corresponding to the most popular mainstream hard disks: 80022-000/001 only supports small-capacity hard disks such as 1TB/2TB, and if you want to support large-capacity such as 3TB/4TB, you must use 80022-002 circuit boards Replacement; 2060-800065, 2060-800077, 2060-800066, 2060-810011 and other commonly used hard disks default PCBs are encrypted to restrict reading of hard disk firmware data, so when we encounter these related hard disk failures, we want to make these hard disks In the case of data recovery, we must purchase the corresponding Hard drive disk unlock lockless PCB circuit board so that the circuit board can be replaced, and then the ROM chip can be exchanged to read the firmware of the hard disk directly to achieve the purpose of data recovery.
Western Digital hard disk board number: 2060-810011,unlocked version, support PC3000 or MRT access hard disk firmware area, currently the hard disk of the board number is all with lock, PC3000 or MRT and other data recovery tools can not access the firmware area Locked in the main control, the hard drive firmware itself has no lock, you need to unlock the hard drive firmware to write to the board purchased by the store. Special note: Good quality before shipment, this product does not support any reason for return, see clearly before placing the order, thank you, can provide technical support

Western Digital hard disk board number: 2060-800077-003,unlocked version, support PC3000 or MRT access hard disk firmware area, currently the hard disk of the board number is all with lock, PC3000 or MRT and other data recovery tools can not access the firmware area Locked in the main control, the hard drive firmware itself has no lock, you need to unlock the hard drive firmware to write to the board purchased by the store.

The currently supported models are as follows:

WD WD20EZAZ
WD WD60EDAZ

Western Digital (WD)hard disk board number 2060-800065.unlock (without lock)Version. It supports PC3000 or MRT access hard disk firmware area. Currently, the hard disk of the board number is all with lock, PC3000 or MRT and other data recovery tools cannot access the firmware area Locked in the central control, the hard drive firmware itself has no lock, you need to unlock the hard drive firmware to write to the board purchased by the store.

The currently supported models are as follows.

  • WD WD20SPZX board number 2060-800065 (SATA serial port)
  • WD WD20SDZW board number 2060-800067 (USB3.0 port, can be replaced by 800065)
  • WD WD20SMZW board number 2060-800067 (USB3.0 port, can be replaced by 800065)

Special note: good quality before shipment, quality problems can be replaced; this product does not support any reason to return, see clearly before placing an order, thank you, can provide technical support.

The board is used ,Each board has been carefully tested to ensure regular operation. some board need replace with a BIOS(ROM)chip. Never use a hot air gun to blow directly. Write. Hot air gun blowing, it is easy to be wrong! Please consult the owner before buying. Non-professionals carefully buy. Otherwise, the return responsibility of the store does not bear.

WD board No. 2060-800022-002 unlocked version Supports reading and writing firmware Support PC-3000 or MRT;At present, the 800022 motherboards on the market do not support 4T hard drives. The 800022 sold in this store can perfectly support 4T hard drives.

Remember: 80022-002 is not like other WD model PCB boards. It does not support reading data directly on PC3000 or MRT. Otherwise, the software will report an error and must be placed on the hard disk to read. Encryption is firmware！

PCB Board number :2060-800066-006 2060-800066-004 universal, unlocked version, support PC3000 or MRT DFL direct read and write firmware, there is no lock plate support,Model unlocked support:WD10SPZX board PCB: 2060-800066HGST HTS541010B7E610 PCB: 2060-800066WD WD10SMZW PCB: 2060-800069WD WD10SDZW PCB: 2060-800069.

The without lock decryption board can read and write firmware in software such as PC3000/DFL/MRT and clear any operations such as S.M.A.R.T.

Leave a Comment

Shopping Cart