Air 2010 2011 Notebook laptop SSD Hard Drive Disk to sata3 Adapter Card for Apple
The built-in solid state drive of ASUS ux21 ux31 super book cannot use the adapter card. Please see it clearly before purchasing!
This adapter card is applicable to SSDs of the following types of machines:
2010 Apple air a1370 a1369 mc503 mc504 MC505 mc506
2011 Apple air a1370 a1369 mc968 mc969 mc965 mc966
MacBook Air 2010 2011 only
(Don’t include the hard drive for this link)
The built-in blade solid-state drive (do not use non Apple blade solid-state drive). This adapter card has the characteristics of preventing the reverse insertion of SSD and the insertion of 2012 air SSD!
Key point: please carefully confirm whether the gold finger pin of your air SSD is a 6 + 12 pin interface, so as not to buy the wrong transfer card and cause trouble to everyone! You can also take a picture and consult the shopkeeper, who will answer for you! There is an interface comparison diagram on it.
About the test: each adapter card will be turned on and enter the system, run HD tune professional edition to check its health status, and run crystaldismark to see if its speed is normal to ensure that there is no problem with the adapter card!
1. The original slot has the function of preventing wrong and reverse insertion of SSD. The design has a clamping position, which can not be inserted reversely. As long as it can be inserted, it can work without aiming at the position. It is very humanized,
Never burn SSD or adapter card due to improper operation!
2. SATA power supply and data socket completely consistent with conventional SATA hard disk
3. Strictly follow the requirements of SATA data wiring specifications, strictly equal length and equal spacing, and have complete ground shielding.
4. The bottom surface of the adapter card is all ground wires, without any other signal wires and power wires. The adapter card can be placed flat on the hard disk or optical drive. (but it is not allowed to connect with other power supplies)
5. On board 3.3V voltage conversion circuit, three terminal voltage stabilization + tantalum capacitor filtering, enough for airssd with 256g, compatible with any host power SATA interface.
6. Large area copper foil heat sink on board makes the air SSD work more stably.
7. Equipped with SSD locking screw and SSD fixing screw nut.
8. The installation positioning hole conforms to the spacing of the chassis and can be easily installed on the optical drive or hard disk.
There are no reviews yet.